| |
|
 |
Specifications
|
|
|
|
VIR LAMINATE 1500 - NEMA (U.S.A) |
It is general purpose laminate most frequently used for work surfaces
and available in thickness 1.5 mm.
LD-3
Test Method |
Property |
Rating |
Nema value |
Rushil value |
| |
Nominal Thickness |
mm |
(+/-) 0.12 |
(+/-) 0.05 |
| 3.2 |
Surface Finish |
- |
Max. warp (+/-)120 mm |
(+/-) 90 mm |
| 3.3 |
Light Resistance |
min. |
Slight effect |
Slight effect |
| 3.4 |
Clean ability |
max. |
20 |
18 |
| |
Stain 1 - 10 |
min. |
No effect |
No effect |
| |
Stain 11 - 15 |
min. |
Moderate effect |
Moderate effect |
| 3.5 |
Boiling Water Resistance |
min. |
No effect |
No effect |
| 3.6 |
High Temp. Resistance |
min. |
Slight effect |
Slight effect |
| 3.8 |
Ball Impact Resistance |
min. |
889 mm. |
1000 mm. |
| 3.10 |
Radiant Heat Resistance |
sec. min. |
125 |
130 |
| 3.11 |
Dimensional Change |
%MD max. |
0.5 |
0.4 |
| |
Dimensional Change |
%CD max. |
0.9 |
0.85 |
| 3.12 |
Dimensional Stability |
%MD max. |
0.5 |
0.4 |
| |
Dimensional Stability |
%CD max. |
0.8 |
0.75 |
| 3.13 |
Wear Resistance |
Cycles min. |
400 |
650 |
|
| |
|
Top |
|
VIR LAMINATE (1.0 mm) - NEMA (U.S.A.) |
This is general purpose laminate available in 1.0 mm thickness.
LD-3
Test Method |
Property |
Rating |
Nema value |
Rushil value |
| |
Thickness Tolerance |
mm |
(+/-) 0.12 |
(+/-) 0.05 |
| 3.2 |
Surface Finish |
- |
Max. warp (+/-)120 mm |
(+/-) 70 mm |
| 3.3 |
Light Resistance |
min. |
Slight effect |
Slight effect |
| 3.4 |
Clean ability |
max. |
20 |
18 |
| |
Stain 1 - 10 |
min. |
No effect |
No effect |
| |
Stain 11 - 15 |
min. |
Moderate effect |
Moderate effect |
| 3.5 |
Boiling Water Resistance |
min. |
No effect |
No effect |
| 3.6 |
High Temp. Resistance |
min. |
Slight effect |
Slight effect |
| 3.8 |
Ball Impact Resistance |
min. |
889 mm. |
910 mm. |
| 3.10 |
Radiant Heat Resistance |
sec. min. |
100 |
105 |
| 3.11 |
Dimensional Change |
%MD max. |
0.6 |
0.5 |
| |
Dimensional Change |
%CD max. |
1.0 |
0.87 |
| 3.12 |
Dimensional Stability |
%MD max. |
Values under consideration |
|
| |
Dimensional Stability |
%CD max. |
|
|
| 3.13 |
Wear Resistance |
Cycles min. |
400 |
650 |
|
USES: For 1.5 mm and 1.0 mm thickness
General Purpose Type is most
frequently used for work surfaces
on counters, islands, vanities, desks and tables. Typical vertical
uses include surfacing for wall panels, teller cages and the front
panels of work stations, such as those in hospitals, airports and
restaurants.
Vertical Surface Type is the usual choice to surface cabinet
walls, doors and drawer panels. It often appears on the vertical
surfaces of desks, restaurant booths and maitre d'stations, and
as architectural cladding. |
|
|
Top
RUSHIL DECOR (0.8 mm) - NEMA (U.S.A.) |
This is general purpose laminate available in 0.8 mm thickness.
LD-3
Test Method |
Property |
Rating |
Nema value |
Rushil value |
| |
Thickness Tolerance |
|
(+/-) 0.1 |
(+/-) 0.08 |
| 3.2 |
Surface Finish |
- |
Max. warp (+/-)120 mm |
(+/-) 80 mm |
| 3.3 |
Light Resistance |
min. |
Slight effect |
Slight effect |
| 3.4 |
Cleanability |
max. |
20 |
17 |
| |
Stain 1 - 10 |
min. |
No effect |
No effect |
| |
Stain 11 - 15 |
min. |
Moderate effect |
Moderate effect |
| 3.5 |
Boiling Water Resistance |
min. |
No effect |
No effect |
| 3.6 |
High Temp. Resistance |
min. |
Slight effect |
Slight effect |
| 3.8 |
Ball Impact Resistance |
min. |
508 mm. |
610 mm. |
| 3.10 |
Radiant Heat Resistance |
sec. min. |
80 |
85 |
| 3.11 |
Dimensional Change |
%MD max. |
0.7 |
0.5 |
| |
Dimensional Change |
%CD max. |
1.2 |
1.1 |
| 3.12 |
Dimensional Stability |
%MD max. |
0.6 |
0.5 |
| |
Dimensional Stability |
%CD max. |
1.1 |
1.0 |
| 3.13 |
Wear Resistance |
Cycles min. |
400 |
500 |
|
USES:
General Purpose Type is most
frequently used for work surfaces
on counters, islands, vanities, desks and tables. Typical vertical
uses include surfacing for wall panels, teller cages and the front
panels of work stations, such as those in hospitals, airports and
restaurants.
Vertical Surface Type is the usual choice to surface cabinet
walls, doors and drawer panels. It often appears on the vertical surfaces
of desks, restaurant booths and maitre d'stations, and as architectural
cladding. |
|
|
Top
|
|
VIR LAMINATE HEAVY DUTY - NEMA (U.S.A.) |
This is most frequently used for table top and specially recommended
where maximum rate of wear & tear is present. We give warranty for
four years for wear resistance.
LD-3
Test Method |
Property |
Rating |
Nema value |
Rushil value |
| |
Thickness Tolerance |
mm |
(+/-) 0.12 |
(+/-) 0.05 |
| 3.2 |
Surface Finish |
- |
Max. warp (+/-)120 mm |
(+/-) 70 mm |
| 3.3 |
Light Resistance |
min. |
Slight effect |
Slight effect |
| 3.4 |
Clean ability |
max. |
20 |
18 |
| |
Stain 1 - 10 |
min. |
No effect |
No effect |
| |
Stain 11 - 15 |
min. |
Moderate effect |
Moderate effect |
| 3.5 |
Boiling Water Resistance |
min. |
No effect |
No effect |
| 3.6 |
High Temp. Resistance |
min. |
Slight effect |
Slight effect |
| 3.8 |
Ball Impact Resistance |
min. |
889 mm. |
910 mm. |
| 3.10 |
Radiant Heat Resistance |
sec. min. |
100 |
105 |
| 3.11 |
Dimensional Change |
%MD max. |
0.6 |
0.5 |
| |
Dimensional Change |
%CD max. |
1.0 |
0.87 |
| 3.12 |
Dimensional Stability |
%MD max. |
Values under consideration |
|
| |
Dimensional Stability |
%CD max. |
|
|
| 3.13 |
Wear Resistance |
Cycles min. |
|
Upto 8000 cycles |
|
| USES: VIR LAMINATE HEAVY DUTY is most frequently
used for Table top and specially recommended where there are maximum
chances of surface being scratched. |
|
| |
|
|
|
|
|
|
RUSHIL
GROUP OF COMPANIES
1,Krinkal Appartment, Mahalaxmi Society, Paldi, Ahmedabad - 380
007., Gujarat, India.
Phone : +91-79-6634346, 6622323 Fax
: +91-79-6640969.
E-mail : rushil@rushil.com |
|
| |
